Below
are a listing of common guitar terms. These terms are used in sales
descriptions when selling guitars. They are also used in repair and
replacement scenarios to describe problems, adjustments or specific
features of a guitar. They are extremely helpful in finding replacement
parts for guitars.
Understanding how instruments work often entails what their comprised
of. Learning these terms may help in understanding of how a guitar
functions, is built and how it plays. They are also very useful in
describing to a tech or repair person what areas need repair or
attention.
Abalone - A highly colorful shell material commonly used on instrument
inlays. Abalone inlays come in a rainbow of colors and can appear to
change color when viewed from different angles. Sometimes also called
"mother of pearl". The color change is known as, iridescence (also
known as goniochromism).
Abalone - A highly colorful shell
material commonly used on instrument inlays. Abalone inlays come in a
rainbow of colors and can appear to change color when viewed from
different angles. Sometimes also called "mother of pearl".
Action - A term generally used to describe the strings height above the tops of the frets.
Active
- When pickup's are said to be active they incorporate a pre-amp which
requires additional power. The result is a boost and/or wider range for
the pickup.
Arch top
- A guitar with an arched top which has been carved or pressed. The
bridge and tail piece are movable. Generally associated with Jazz
musicians. Common examples include the Gibson ES series of guitars.
Bakelite - Early form of plastic used in some guitars from the 30's to the 50's.
Bigsby - Term used for a simple non recessed vibrato developed by Paul Bigsby
Binding
- A protective and decorative strip made of wood or plastic that is
placed along the outer most edges of the top, back, neck, fingerboard
and some times headstock. This is a cap used to seal and protect joints.
Sometimes incorrectly referred to as purfling, purfling really refers
to inlays along side of the binding and not the actual binding itself.
Block Markers - Square, rectangular or shark tooth inlays marking fingerboard position.
Body - The main portion of the guitar which the controls, bridge and pickups are mounted. The body can be hollow (a hollow body) or solid (a solid body) design.
Bolt On
- Normally refers to an instrument that has it's neck attached by bolts
rather than being glued in place. Fender was on e of the first to use
this design. Bold on is a bit of a misnomer as generally screws rather
than bolts are used.
Book matched
- Generally most acoustic and many arch top guitars have tops and backs
that are 2 pieces of wood glued together to form one large panel. Book
matched refers to the wood coming from the same tree and actually being
one piece of wood that has been but into consecutive slices so the grain
in the panels creates mirror image patterns.
Bout
-The guitar's body the most important characteristic of the guitar: it
provides the resonance that shapes the tone of an acoustic or electric
guitar, and provides the volume (or heft) of an acoustic guitar and the
sustain of an electric. The top, smaller curved part closest to the
strings is called the "treble" or "upper bout", and the bigger curved
part is the "bass" or "lower bout", and the waist is the narrow section
that divides them.
Brace
- Braces are wooden struts glued inside hollow body guitars providing
strength and affecting tone quality. An X brace is a popular brace
pattern used in hollow body guitars. Other bracing patterns include the
ladder brace, fan bracing and scalloped braces.
Bridge
- Bridges come in a variety of shapes and sizes. On a solid body
electric guitar they generally fixed and hold the saddle that makes
contact with the strings. On arch top guitars the bridge is usually held
in place only by the tension of the strings and can be easily moved,
also called a "floating bridge". Many bridges are adjustable by thumb
wheels incorporated into the bridge. The bridge may sit on top of a
bridge base plate or bridge plate.
Bridge Pins - Bridge Pins anchor the strings on to the bridge.
Bullet - Name give to the appearance of truss-rod adjuster nut on the headstock of some Fender guitars.
Bridge Pickup - In electric guitars this is the pickup that is placed closest to the bridge
CAP
- Also called a capacitor, a common electrical component that stores up
an electrical charge generally used on the tone potentiometer on
electric guitars.
Celluloid
- A common plastic material used on guitar pick guards, tuners and
binding. This material is not very durable and deteriorates over time
therefore many vintage guitars have issues with celluloid parts.
Center Block - A solid wood block running through the body of a semi-acoustic guitar body.
Checking
- Used to describe cracking found in lacquer finished guitars. Vintage
guitars often have checking in their lacquer finishes. Checking is
caused by the guitar's wood expanding and contracting with changes in
temperature and humidity. Is important to maintain constant humidity and
reasonable range of temperature to prevent checking.
Cutaway
- A guitar which has been cut away to allow easy access to the frets
while reaching over the body. A double cut guitar away has both sides
cut away. Many people just refer to "single cut" and "double cut"
guitars.
Decking-Refers
to a luthiers technique whereby the tremolo is fully tightened. It lays
flat on top of the guitar surface. It simulates a hard tail guitar.
Dog Ear - Nick name for a P-90 style pickup with mounting ears.
Dot Neck - Guitar with simple dot inlays in the neck position markers.
Dreadnought
- Generally associated with C.F. Martin and their biggest and loudest
acoustic guitar. Now used my many other brands on large acoustic guitar
models.
Electro Acoustic - An acoustic guitar with a built in pickup, often a piezo electric pickup.
End block
- Acoustic guitars normally have an end block and a neck block at
opposite ends of the body. The end block is usually glued to the top,
back, and sides at the bottom end of the guitar. Often strap buttons are
anchored into this block as it provides the strength necessary to
support a strap.
F-hole - Term used for an "f" shaped sound hole on some hollow body and semi-acoustic guitars.
Fingerboard
(also called a fret board) - This is the surface of the neck that
contains the frets. Note there are also some guitars that are "fretless"
but the fingerboard is still used without frets. The fingerboard is
generally a separate piece of wood glued to the neck. It's often made of
a hard durable wood as the frets must be securely anchored into the
fret board. Vintage guitars often used Brazilian Rosewood and Ebony for
fingerboard material.
Finish - This refers to the protective coating covering the guitar, often paint or lacquer.
Fixed Bridge - Refers to non-vibrato bridges.
Flame - Sometimes also called Flame Top. Generally refers to Maple with dramatic grain resembling flames.
Flat Top
- Used to refer to an acoustic guitar with a flat (non-arched) top.
Many Martin and Gibson guitars are considered flat top acoustic guitars.
Fret
- Metal wire inlayed at intervals along the fingerboard. The guitar
player presses down on the string forcing the string to touch the fret
changing the sting length and producing different notes. There are a
variety of fret wire profiles used for frets.
Hang Tag - Small tags and cards hung on guitars in show rooms. A hang tag for a vintage guitar is generally very difficult to find.
Hard Tail - Term used to describe an electric guitar without a vibrato bridge, often used to describe Fender guitars.
Headstock
- Describes the part of the guitar where the strings attach to the
tuners. Also called a peghead. Fender generally uses 6 in-line tuners on
the headstock and Gibson prefers three on each side of the headstock.
Heel - Portion of neck where the neck curves or is reduced to join the body.
Hollow Body - An electric guitar body style with a thin body similar to an acoustic guitar.
Humbucker - A noise canceling twin coil pickup normally associated with Fender.
Inlay - Decorative material that is cut and embedded into the body, neck or headstock of a guitar.
Intonation
- Refers to the guitars ability to play in tune at various positions
along the neck. Often adjusted by adjusting the bridge saddle.
Jackplate - Mounting plate for output jack.
Laminated
- The backs, sides and even tops of some instruments can be made from
several pieces of wood which have been laminated to form one piece,
usually at the determent of it's sound. (Especially if it's the top
that's laminated.)A neck can also be made from more than one piece of
wood to produce a decorative center stripe.
Locking Nut - Bolts that lock the strings in place at the nut.
Logo - The manufactures brand name or trademark usually on the headstock.
Luthier - A guitar maker and guitar repair expert. Always look for a degreed trained luthier. Sometimes incorrectly spelled Luther.
Machine Heads - also knows as tuners or tuning machines. Allows string tension to be changed changing the pitch of the strings.
Neck Block
- The neck block is found inside of the body at the base of the neck.
The Neck block provides a strong point to mount the neck to the body.
Neck Plate
- A metal plate used in the Fender style bolt on designs. It is screwed
to the neck and the body fastening the neck to the guitar body.
Neck Pickup - Refers to the pickup closest to the neck.
Neck Reset
- A neck reset is performed restore the correct angle between the
fingerboard bridge which provides the correct action needed to play the
guitar.
Neck Press - Uses gentle heat and pressure to straighten a neck. Can be tricky and should only be performed by a trained Luthier.
Nut
- Located at the end of the fingerboard before the headstock, used to
provide proper string height and spacing before the strings enter the
tuners.
P-90 - Refers to an early Gibson single coil pickup.
PAF - Refers to a sticker on Gibson pickups.
Passive - Usually describes a guitar that does not use pickups which require power (active pickups).
Peghead
- A peghead is where the tuners are mounted, also called a headstock.
Vintage guitars often have cracks or repaired headstocks as this will
often crack if a guitar falls over.
Pick guard -
Also called a scratch plate, a thin covering screwed or glued to the
top of a guitar to protect the guitar from picks and fingernails. Comes
in a variety of colors and styles. Often cracked around the screw holes
on vintage guitars.
Pot
- A Potentiometer mounted to the body of an electric guitar commonly
used for control of volume and tone. The tone pot will normally have a
capacitor soldered in circuit.
Pre-CBS - Refers to Fender guitars manufactured before the 1965 takeover of Fender by CBS. Vintage collectors prefer pre-CBS guitars.
Quilted -
Describes beautiful undulating pattern found in wood, generally refers
to Maple and can also be referred to as "maple quilting" or maple
quilted".
Relief
- The upward arching bow in an instrument's neck that allows the
strings to move without touching the frets. A bowed or warped neck will
have to be heated and pressed to restore the neck to correct relief.
Refin
- Refers to a refinished guitar. Refinished guitars have a
significantly lower value than original guitar with the original
surface.
Refret - Also called a fret job, refers to re-fretting a guitar.
Rout
- A hole or cavity cut into a guitar, often the body of the guitar.
Many times a pickup cavity is routed to enable a different pickup to be
installed. Routing will diminish the value of a vintage guitar and
routing should not be done on a valuable guitar.
Rosette - The decorative strip or inlay work found around the sound hole on an acoustic guitar.
Saddle - The part of the bridge where the strings make contact transferring the string vibration to the bridge and body of the guitar.
Scale Length - Length of the vibrating string from nut to saddle or twice the distance from the nut to the 12th fret.
Set Neck
- A set neck is a neck that is glued into the body and uses no bolts
for attachment. This is normally associated with electric guitars.
Setup -
Guitar repair term to set intonation and action and all services to
achieve the set up such as neck axis alignment to get the proper relief.
Single Coil Pickup - An early pickup design with a single coil of wire wrapped around a magnet
Soap Bar - Nickname for a P-90 style pickup that has no mounting ears.
Solid Body - Refers to electric guitars with a solid (non-hollow) body. Includes many Fender and Gibson guitars.
Spaghetti Logo - Early style Fender logo with letters resembling spaghetti. Used to assist in dating Fender guitars.
Sound Hole
- Hole in the top of the body of a hollow body guitar. May enhance
sound of be simply for looks. An F-Hole is a type of sound hole.
Sustain - Length of time a sting vibrates
Split Coil
- A double coil pickup wound with multiple coils that are smaller than a
standard 2 coil pickup where each coil works with a few strings. Most
commonly one coil is used for the e and a strings and one coil is used
for the d and g strings. The Fender Precision bass uses this type of
pickup. A split coil generally has a little less hum canceling but
better high frequency response.
Stop Tail piece
- Sometimes called a stud tail piece. Fixed to the top of the guitar
and anchors the strings to the top. Holes in the tail piece allow
strings to pass through the stop tail piece and over the bridge.
T- Frets - Refers to the shape of the metal fret. T-Frets are used in most refrets.
Tail piece
- On instruments without bridge pins the strings are commonly anchored
to a tail piece. This normally mounts to the end block and pulls the
strings down towards the top after passing across the bridge.
Thinline
- Term used to describe hollow body electric guitars, first used with
the Gibson Byrdland guitar. Also used by Fender and others.
Through Neck - A through neck design uses a neck that actually runs right through the center of the body.
Trapeze Tail piece - This tail piece design has a hinge like mechanism on it and has a shape similar to a swinging trapeze.
Tremolo
- Another term used for Vibrato or Tremolo Arm but could refer to the
entire bridge style. Some bridges are Tremolo and some are hardtail or
non-moveable.
Truss Rod
- A rod which runs through the center of a guitar's neck below the
fingerboard, The truss rod helps to stiffen the neck and prevent bowing
caused by the tension caused by the strings. Can be adjusted (in most
guitars) to change the relief of the neck.
Truss Rod Cover - A decorative cover that covers up the access point for adjusting the truss rod.
Thumb wheel
- A small wheel used on adjustable bridges (those usually found on arch
top guitars or mandolins) to adjust the bridges height. The top portion
of an adjustable bridge rest upon these flat wheels and as they are
screwed upward on their post the top portion of the bridge is raised.
Tune-o-matic
- This bridge is commonly found on Les Paul style electric guitars. It
sits on two thumb wheels and has six saddles which allow individual
intonation adjustment for each string.
Tuning Machines
- Mechanical devices used to increase or decrease string tension.
Located on the guitar head stock. These can be all inline (Fender style)
, all individual or in 2 groups (Gibson style).
Veneer - Refers to thin wood or plastic laminate used in the construction of some guitars.
Vibrato - Bridge and/or tail piece which can alter the pitch of strings when the vibrato arm is pressed. Also called a whammy bar.
Volute - A piece of wood installed just behind the peghead. It strengthens the neck where the headstock begins.
Now that you understand all the parts of a guitar. It's time to build one!
Haywire Custom Guitars Glossary Page by Rick Mariner
Rick Mariner - Owner, founder and CEO of Haywire Custom Guitars Inc.(
http://www.HaywireCustomGuitars.com
) and a member of The Association of Stringed Instrument Artisans
(A.S.I.A.) as well as a guitar player. He holds a bachelors degree from
University of Md. and a Masters degree from George Washington
University. Haywire developed an 8 - Point "Gig- Ready" guitar process
that allows for Haywire Custom Guitars that are "GIG-READY".
With many years of development and guitar set-up experience, we pride
ourselves in helping to build you the "Just Right" Haywire guitar for
you at prices well below market. Haywire Custom Guitars, "Builds
satisfied players... one Haywire guitar at a time".
