Subscribe in Bloglines Subscribe in a reader Haywire Custom Guitars #1 Guitar Players Blog from South Carolina: Guitar repair by Haywire Custom Shop

Subscribe to Haywire Custom Guitars #1 Guitar Players Blog

Showing posts with label Guitar repair by Haywire Custom Shop. Show all posts
Showing posts with label Guitar repair by Haywire Custom Shop. Show all posts

Thursday, December 26, 2019

Guitar Neck shaving in the Haywire Custom Guitars-Custom Shop


Sometimes adding a new neck can be the better, faster, safer but not necessarily a cheaper option. A guitar neck shave?

We wouldn’t recommend doing it yourself, however if you have a neck that is too large for your hands, clumsy and uncomfortable for you then……….a guitar neck shave may be a better option for YOU.  It’s not a “one size fits all” world but most manufacturers only aim for the “average” players hands-not yours. Jimmy Page had the neck shaved on his 1960 Les Paul.  Jimmy’s Les Paul was shaved to a slim taper.  Sure the nut width may be different on some guitar models from either 1-5/8 to  1-11/16 on electric guitars. Acoustic guitars will sometimes have a wider nut width on the upper wider end such as 1-11/16 to 1-3/4 then to 1-7/8 inches on some models. The necks are generally the same.

What are your guitar playing needs?

Let’s get back to YOU and your hands. If changing the nut width doesn’t do it for you then consider a guitar neck shave. In the realm of professionals it’s and easy job done regularly. We do it every day here in the Haywire Custom Shop. With the high cost of replacement necks in the neighborhood of around $250 ( for a used one) to $500 for a new one maybe the one you have just needs a tweak?  What do you think? It’s certainly worth a try especially if your not doing it.

Your neck is then shaved to the specs desired

The cost of a neck shave is very inexpensive compared to a new neck purchase. Consider the benefits. First, you can ship your guitar or just the neck to us, it will arrive in a day or two. We will work on it the day it arrives. The neck will be shaved to whatever specs you request. We always take measurements at the 1st, 3rd, 5th, 7th 9th and 12th frets upon arrival. Your neck is then shaved to the specs desired. We’ll check the neck for any problems such as twisting and over or under bow as well as fret dressing on the ends if required.

We always take measurements

After the neck is smoothed to a soft feel we add a great Satin finish to help preserve the wood for you at no extra charge. So, with the low cost of $135 vs. a new neck it’s worth going for a guitar neck shave. The turn-around time is 2 days then back home to you.

We offer: Guitar Neck Replacement, Fret leveling, Nut filing
Custom Guitar Neck Contours, Custom guitar neck shaping, thinning, shaving and profiling

By Rick Mariner| February 9th, 2019|a guitar neck shave, Had your guitar neck shaved?|

About the Author: Rick Mariner

Mr. Rick Mariner Owner and Founder and CEO of Haywire Custom Guitars Inc. He holds a bachelors degree from University of Md.and a Masters degree from George Washington University. Rick developed his exclusive 8 – Point “Gig- Ready” guitar process that allows for Custom Guitars that are “GIG-READY”. With Rick’s many years of development and guitar set-up experience, Haywire Guitar shop “Builds satisfied players… one Haywire guitar at a time”.

Related Posts

My Guitar is Not a Thing. It is an Extension of Myself.

It is Who I Am.
Our Reverb Store
Contact Us
Copyright Haywire Custom Guitars (c) 2011-18. All Rights Reserved
By | June 24th, 2019|Custom Guitar Mods, difficult to play acoustic guitars, Faster playing neck, fix your guitar, Function Custom Guitar Shop, Guitar adjustments, guitar by Haywire, guitar comfort level, guitar comfort modifications, guitar improvements, Guitar Neck Adjustment Information, Guitar neck reshaping, Guitar Neck Shaping, guitar neck shaves, guitar neck shaving, Guitar Neck Shaving Service: Haywire Custom Guitars:, Guitar neck straightening, Guitar repair by Haywire Custom Shop, Guitar Repair Education

Tuesday, March 19, 2019

Guitar Neck Reshaping

Have you ever considered….

guitar neck reshaping to customize a guitar just for the way you play?

Firstly, when in the middle of a gig do you notice some hand fatigue?  In addition to, inability to reach notes or the feeling there’s something slowing you down?  Did you ever pick up a friends guitar and say to yourself, “I wish my guitar felt this good”.  And, have you found a guitar somewhere that looks exactly like your and had to go grab it to see what it felt like?  Most importantly, were you surprised?  Likely it didn’t feel like yours did it?  Players begin the customization process the very day they get a new guitar. Guitar neck reshaping is often desired but hardly attained without the proper resources.

Guitar neck reshaping is often desired………

There are many possibilities for better playing guitars.  For example: a neck that allows you to change the scale length of your 25-1/2″ Fender scale guitar.  Consider the shorter Gibson scale of 24-3/4″. This kind of customization shortens the distance between frets and lowers string tension for easier, quicker playing.  Thought about it?  Never heard about it?  It’s very attainable for any player who is desiring a change. Some players  need a change as in guitar neck reshaping but can’t really verbalize what they need.  Equally important, we’ll often hear, “this guitar is uncomfortable, it’s hard to play, my hands ache after a while or I can’t play as fast as I want to. The spectrum of player comfort is extremely wide.

The spectrum of player comfort is extremely wide…..

Guitars are manufactured for “sales” not your comfort. Further, most companies build in the middle of the spectrum to “general players” with “average hands” with “average” needs.  Similarly, they  do not take into account comfort or needs of players “outside” the middle of the spectrum.
In fact, if your an average guy, with average hands and middle of the road in every way-you’ll be fine with an general off-the-rack guitar built for average sales produced by almost every guitar company. As a result, because of your style differences, hand size, physical limitations, unusual playing style you don’t fall in the “middle of the spectrum”.

reshaping an existing guitar neck

As a result, we can help.  Furthermore, reshaping an existing guitar neck can be the best customization ever for you and your guitar neck. Especially, in particular, your guitar neck contour or back shape of the neck is important for optimum play-ability and hand comfort.  $135 plus return shipping may be the best money you ever spent on your guitar. Call us 843-347-5742 or email us : haywire@sccoast.net
In conclusion, you’ll need help to determine which guitar neck reshaping process works best for your playing comfort. Think about a comparison with a neck you know that you already prefer. Above all, if you know what you need then you’re 90% there then we can get you all the way there. Compare the dimensions of the neck you’d like to change to those of your “favorite” neck for a start.  In brief, a set of digital calipers is all you need to do that!
Haywire Custom Guitars-Play Painlessly with a new ergonomic guitar neck
Haywire Custom Guitars-Play Painlessly with a new ergonomic guitar neck shape

We offer: Guitar Neck Replacement, Fret leveling, Nut filing
Custom Guitar Neck Contours, Custom guitar neck shaping, thinning, shaving and profiling





About the Author:

Mr. Rick Mariner Owner and Founder and CEO of Haywire Custom Guitars Inc. He is a member of The Association of Stringed Instrument Artisans (A.S.I.A.) as well as a guitar player. Rick holds a bachelors degree from University of Md.and a Masters degree from George Washington University. Rick developed his exclusive 8 – Point “Gig- Ready” guitar process that allows for Custom Guitars that are “GIG-READY”. With Rick’s many years of development and guitar set-up experience, Haywire Guitar shop “Builds satisfied players… one Haywire guitar at a time”.

Leave A Comment

Logged in as Rick Mariner. Log out »



Friday, March 15, 2019

Guitar Neck Crack Repair



Guitar Neck Crack Repair

In general, how much does a neck crack repair cost?
Usually we can accomplish guitar neck repairs for under $250

image Haywire Custom Shop guitar neck crack repair
Haywire Custom Shop guitar neck crack repair

Head stock repair, guitar neck repair, guitar brace and crack repair and much more

  • Head stocks and guitar neck repairs
  • Crack repair
  • Brace repair
  • Bridge repair and replacements
  • Guitar neck shaving, thinning , re-profiling and more…
Most importantly, We can fix broken guitar necks in less than a week for you
  • Haywire Custom Guitars features: Expert Electric and acoustic Guitar repairs. Also, upgrades, mods and fast service.  Serving Myrtle Beach and Conway, and Horry County, SC. Experienced technician will keep your guitar playing the best it can play!  Haywire Custom Shop will also repair and modify other stringed instruments. Including our “One Day Urgent Care Guitar Repair“.  Set up an appointment today-call 843-347-5742

Guitar Repairs for all guitar including: PRS, Ibanez, Jackson, Gretsch, Squier,
In addition: Gibson, Taylor, Fender, Martin, Guild, Seagull ,Yamaha, Ovation, Washburn, Epiphone, G&L, Rickenbacker, ESP, Schecter and many others.
Haywire Custom Guitars -Custom Shop

image Haywire Custom Guitars - Custom Builds Super-Double Fat Guitar
We fix all guitars! Haywire Custom Guitars – Custom Builds Super-Double Fat Guitar

About the Author:

Mr. Rick Mariner Owner and Founder and CEO of Haywire Custom Guitars Inc. He is a member of The Association of Stringed Instrument Artisans (A.S.I.A.) as well as a guitar player. Rick holds a bachelors degree from University of Md.and a Masters degree from George Washington University. Rick developed his exclusive 8 – Point “Gig- Ready” guitar process that allows for Custom Guitars that are “GIG-READY”. With Rick’s many years of development and guitar set-up experience, Haywire Guitar shop “Builds satisfied players… one Haywire guitar at a time”.

Leave A Comment



Friday, March 17, 2017

Do You Really Need to Buy NEW Guitar Pickups???


It's always great to hear a players opinion on our guitars because it keeps
us going in the right direction. Here are some excerpts of an article I wrote about finding your sound. Guitarists sometimes see greener grass when it could be its already green enough. They love to customize their guitars. The first thing they want to change are the pickups. Having never built one or tested a guitar pickup most players will forge ahead anyway and make the BIG CHANGE. I have to ask....Why?  Have you tested yours first?  Is it at the max height for best sound?  Is it broken?  If it's picking up sound it's doing the job.

It basically mirrors back the sound. 
It simply hears the sound signal and transfers it to the amp & speaker. When you're singing what do you notice about voice quality when backing off the mike or singing very close? Is there a "sweet spot" where its perfect? Same goes for pickups. There are a few factors you may want to test before you go to the trouble  and expense of adding new pickups.
After all, I use all kinds, all brands and styles in the custom guitars I build guitars for players and still find it difficult to determine if there is much difference between most. They are magnets and copper wire. 
All pickups have the basically the same ingredients.
Image result for inside skeletal view of single coil pickup-guitarImage result for copper guitar pickup winding wire


Pickup companies are trying to sell you on their brand, guitar mechanics will give you the facts. Salesman will give you the bull.

So..... try the least expensive methods first before going nuclear. 

First: test the strings and try a string change to a different set of strings. Newer strings are generally stiffer and fresher thus a cleaner tone. Also, try a heavier gauge string to give you more body in the sound.

The second test for you will be more subtle, but it will be very effective. It involves distance and signal strength. The pickups have elevator screws that are there to raise and lower them closer or farther from the strings. You'll just need a Philips head screw driver and turn until you see the pickups move either up or down where you want them and repeat the process until the pickups are within the range where they will hear the strings close up and personal.
Then begin your testing. Play,.... then lower the pickups incrementally between testing sessions so as to try several different levels of signal strength. Only in this way can you hear the differences. Remember, clarity and sound quality have more to do with "Your" ear than what other players hear.
A clean sound for some players may find the pickups very low under the strings whereas a clean sound for other players may find the pickups snugged as close to the strings as physics will allow. Distortions can occur on the extremes of this spectrum

The next test is to check the amp you are playing from. For this test you need a clean control. Be sure there are no obstructions or ways in which players like to process or in some cases "over process" themselves to impeded the pure sound of what the pickup hears. This means plug the guitar directly into the amp with no pedals, stomp boxes or effect in between to change the tone.
Your results will be much better. Some players make the mistake of testing each guitar on the same setting in their search for the ideal sound in a guitar when the result will simply be just testing how different guitars sound on the same setting.
This test will produce results--but not the results you're looking for. Remember, every guitar is set up differently. The strings are generally different ages or brands. So for the perfect empirical evidence needed everything must remain the same.
 Flatten The EQ

So, to make sure you're getting the sound you want to hear from your pickups try different EQ settings on the amp. Be sure that if there are two volume controls turn the channel volume low and the master way up. Start with flat EQ setting the introduce more or less high and low frequencies to get the sound best for your ear and the music that you are playing.
Keep in mind a change of pickups should be one of the last resorts in finding your sound and not the first.
Image result for pickup winding on a drill

There are so many brands of pickups how do you know where to start?   With some 100 plus pickup manufacturers just in the USA if you decide on a brand then the next problem is which pickup does that brand have that will do the job? At $150 average price for a set of 2 pickups just for a Telecaster how long can you afford to keep making changes in your search for the Holy Grail?  If after these free tests you should decide a pickup change is warranted be sure to take an experienced tech with you to the pickup store. The specs you'll need to be aware of are output and magnet strength. Output, measured in Ohms has nothing to do with tone or clarity just resistance. The magnet strength is important because a larger heavier magnet will cause the strings to be pulled out of tune and thwart sustain so be very careful here so as not to equate magnet strength or Ohms with "better quality". The least expensive fixes are often the most effective. If done properly and methodically you'll be surprised a what you'll find  and how many different tones are already in your pickups if you peek inside.
Image result for view of single coil pickup with cover removed
Richard R Mariner CEO
Haywire Custom Guitars Inc.
843-347-5742

Monday, January 25, 2016

All About Guitar Frets

All About Guitar Frets


When discussing frets at the Haywire Custom Shop, the discussion really needs to be divided up into two separate parts.  The first part to consider is whether or not the frets are properly installed, dressed, and maintained.  The second part to consider is if the frets that are on your neck are the right frets to match your style of playing and have the feel that you are looking for.

So let's talk about the first part for a minute, whether or not your frets are properly installed, dressed, and maintained. This is easy enough to determine. First, check for any wear on the frets where the strings might have created grooves in certain places, any nicks or irregularities that might catch a string and so forth.  If you find any of those things, you might want to consider some maintenance to correct those problems.

If you have checked your frets and found them to be well maintained without any noticeable wear, but still think that your neck doesn't feel just right for your style of playing, you might want to consider a different fret possibility. Frets come in a variety of heights and thicknesses, and each one will cause the neck to feel just a bit different under your fingers. The bottom line is that frets do matter. If a guitar plays well, it has the right frets. If it's hard to bend a note, that instrument probably doesn't have the right frets for challenging solo work.


Now let's talk about the different types of frets that are available.

Standard Nickel/Silver Fret Wire


The composition of this fret wire, while called "nickel/silver", contains no silver at all.  The ingredients are brass and nickel. Apparently, 18% nickel is sufficient to make brass look silver!  For general reference we use Dunlop's fret numbers, however, actual fret dimensions vary somewhat from batch to batch.








Fret Model         Width x Height  Description
6100       .112" x 0.55"       Huge! This is big stuff for the almost scalloped feel.
6105       .096" x 0.47"      Narrow and tall. A very popular choice.
6130       .106" x .036"      Often referred to as "medium jumbo". This is the size found on many Gibson® necks.
6230       .080" x 0.43"       This is the smallest fret wire. Used on older Fender® necks.
6150       .103 x .046"         A true "jumbo". It is about the same width as the 6130 but a bit taller.


Stainless Steel Fret Wire


If you want an extra slick feel along with super smooth bending and playability, stainless steel fret wire might be just what you're looking for. Stainless steel is harder than the standard nickel/silver fret wire, so it takes much longer for these frets to show wear from your strings, and typically last much longer than standard fret wire.




 Fret Model        Width x Height  Description
SS6105  .102" x .049"        A true "jumbo". It is about the same width as the 6130 but a bit taller. POPULAR!
SS6230  .080" x 0.43"     Small vintage Fender® size. Needs frequent dressing and leveling
SS6115  .107" x .052"     A true "jumbo" wire.

Almost Gold Color Fret Wire


New Gold colored fret wire is a tough copper alloy without Nickel and the color is similar to 12k Gold in appearance. This is not the same brass color as Warwick wire. This is not just a "plating".  The color is solid throughout. It's very rich looking wire. Gold alloy wire works and wears about the same as the standard nickel / silver fret wire.


image for Gold Fret wire at Haywire Custom Guitars



Fret        Width x Height  Description
61GD     .090" x .055"       Narrow and quite tall. Fret Model  Width x Height


Fret        Width x Height  Description
61GD     .090" x .055"       Narrow and quite tall. Fret Model  Width x Height

Thank you Warmoth Guitar Products Inc. for providing the fret info!

Haywire Custom Treble Bleed Circuit Modification (to use the volume control without sacrificing tone)

  Haywire Custom Treble Bleed Circuit Modification


Would you like being able to use the volume control without sacrificing tone? 

A Treble Bleed Modification allows you to roll off your volume without losing the highs. We'll add a treble bleed circuit to your guitar. It will preserve high end frequencies and improve the taper when rolling back your volume control.

Electricity searches for ground. We manipulate it and make it do things on its way there.  When you turn your guitar's volume down, you're allowing some of the current to go to ground as opposed to going out to the amp to make sound. 

As the volume decreases, the frequencies that leave first are the high ones, which make the tone seem muddy and thick, without the "edge" on it.  A way to avoid this is by using what's called a treble bleed circuit. It's called this because it prevents the treble frequencies from bleeding off.  It allows some of the treble frequencies (the ones we want to keep) to walk around the volume pot to the output, rather than go through it and get lost to ground.


At Haywire Custom Shop we simply install a 220K resistor in parallel with a 470pf capacitor. If you'd like-we can add one to your guitar to preserve high end frequencies and improve the taper when turning your volume down. There is no charge for this option-simply let us know you'd like it added when your purchasing your new Haywire Guitar or if we're just repairing yours!

What Is Guitar Intonation And Why Is It Important?

Guitar Intonation


image result for guitar bridge at Haywire Custom Guitars



An obvious question?  Yes!  Worth talking about?  Absolutely!

Intonation is the accuracy in which an electric guitar or bass can produce a fretted note and the most important issue with any instrument.  Setting the intonation on a guitar is the act of adjusting the length of the strings (by moving the bridge saddles) to compensate for the thickness of the string and the stretching of a string due to pushing it down to the fret board to produce a note. For our purposes here I will focus only on electric instruments for now.

To adjust the intonation of your guitar or bass guitar, you move the bridge saddles toward or away from the fret board until the 12th fret note and its harmonic are equal in pitch to the same open-string note, which are exactly one octave apart. Accurate intonation is critical to pitch quality.  Pitch quality is essential to "in tune"  playing.

Poor pitch quality = "out of tune" notes which in turn = poor musical presentation.  Wouldn't you want to present your musical talents in the best way possible?  Of course, you do.


Now, it is not necessary for a guitar player to know this at all.  It is essential however that the guitar possess this quality and maintain as close to perfect intonation as possible.  Buying on looks alone can be very disappointing.  If however, you like an instrument for the looks but realize that you will need to have it worked on to get it playable then that is fine.  It's best to speak to a Luthier or guitar builder previous to any purchase.  It's like to asking a mechanic which car he would recommend before you walk into the show room to select one. You can benefit from his first hand knowledge and experience and not have to go it alone.  After all the mechanic knows which cars  breakdown.

Ordering From Haywire Custom Guitars

If you would like to order this or any other custom guitar, please contact us and we will be happy to discuss your guitar needs.

Blog Home