google-site-verification: google362a6201f1923986.html
Haywire 8 Point Gig Ready Guitar Process
Point 1: 4-
Each guitar neck is checked and
adjusted to be sure it is true and straight to ensure proper alignment
on all axis. This step ensures proper action and allows for more
accurate and easier guitar tuning, playing and set-
Point 2: Inspect and lube the guitar tuning gears
Before installing the guitar tuning
gears, each one is checked thoroughly. Each tuning gear is adjusted so
that there is no play in the mechanism. They are then lubricated to
insure smooth and even movement to make your guitar tune accurately.
Point 3: Potting the guitar pickups
We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback.
Point 4: Prep the guitar body
Upon installing the guitar electronic
components, great care is taken to ensure that all wires are properly
routed, spaced, and grounded to ensure years of trouble free service
with your guitar.
Point 5: Level and polish the frets
This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
Point 6: Radius the guitar strings
Most guitar necks have a contour over
the top of the neck called the radius. We adjust the strings to make
sure the height of each string follows the contour of the guitar neck
radius.
Point 7: Adjusting the overall guitar string height and the action
Once we set the contour and radius of
the guitar strings, it’s time to adjust the overall height of the
strings from the top of the frets to the bottom of the guitar strings.
Point 8: Set the guitar intonation
This step is done twice. The intonation is set two times with a 24 hour "seat-
google-site-verification: google362a6201f1923986.html
